Wednesday, February 17, 2010

Here is the back bone and neck installed

HEre are the down tubes installed.

Bottom tubes, sidecar loops and front motor mount are installed in this pic

Here it is with the crash bar installed. This is as far as I can go before bolting it down in the jig and welding it together.

1 comment:

  1. Matt - curious about where HD used to heat their frames to 1535 or so, quench it, heat to 700 or so, and let cool. This would harden then temper the metal. Do modern metals used in the repair maintain the same level of structural integrity?

    BTW, amazing job.

    Thanks, Russell S.